467
Table 117 Command output
Field Descri
tion
SendCnt Number of interfaces to send the LSA.
RxmtCnt Number of LSAs in the link state retransmission list.
Status
LSA status:
• Normal.
• Delayed.
• Maxage routed—The LSA has reached its
maximum age.
• Self originated.
• Stale—A self-originated LSA is received during
the GR process.
display ospfv3 nexthop
Use display ospfv3 nexthop to display OSPFv3 next hop information.
Syntax
display ospfv3 [ process-id ] nexthop
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not specify this
argument, the command displays next hop information for all OSPFv3 processes.
Examples
# Display next hop information for OSPFv3 process 1.
<Sysname> display ospfv3 1 nexthop
OSPFv3 Process 1 with Router ID 1.1.1.1
Nexthop : FE80::20C:29FF:FED7:F308 Interface: Vlan2
RefCount: 4 Status : Valid
NbrID : 1.1.1.1 NbrIntID : 21
Nexthop : FE80::20C:29FF:FED7:F312 Interface: Vlan12
RefCount: 3 Status : Valid
NbrID : 1.1.1.1 NbrIntID : 38
To Next Page
Loading...
Need help?
General
