15
No. Protocol Lifetime FD State Start/End
--------------------------------------------------
1 DIRECT6 480 29 End No/No
2 STATIC6 480 32 End No/No
3 ISISV6 480 30 End No/No
4 BGP4+ 480 31 End No/No
For command output, see Table 11.
display ipv6 rib nib
Use display ipv6 rib nib to display next hop information in the IPv6 RIB.
Syntax
display ipv6 rib nib [ self-originated ] [ nib-id ] [ verbose ]
display ipv6 rib nib protocol protocol-name [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
self-originated: Displays information about next hops of self-originated routes in the IPv6 RIB.
nib-id: Specifies a NIB by its ID in the range of 1 to FFFFFFFF.
verbose: Displays detailed next hop information in the IPv6 RIB. Without this keyword, the command
displays brief next hop information in the IPv6 RIB.
protocol protocol-name: Specifies a protocol by its name, which can be bgp+, direct6, isisv6, ospfv3,
ripng, or static6.
Examples
# Display brief next hop information in the IPv6 RIB.
<Sysname> display ipv6 rib nib
Total number of nexthop(s): 151
NibID: 0x20000000 Sequence: 0
Type: 0x1 Flushed: Yes
UserKey0: 0x0 VrfNthp: 1
UserKey1: 0x0 Nexthop: ::
IFIndex: 0x111 LocalAddr: ::
NibID: 0x20000001 Sequence: 1
Type: 0x1 Flushed: Yes
UserKey0: 0x0 VrfNthp: 1
UserKey1: 0x0 Nexthop: ::1
IFIndex: 0x112 LocalAddr: ::1
To Next Page
Loading...
Need help?
General
