393
reset bgp dampening ipv6 unicast
Use reset bgp dampening ipv6 unicast to clear BGP IPv6 unicast route dampening information and
release suppressed BGP IPv6 unicast routes.
Syntax
reset bgp dampening ipv6 [ unicast ] [ vpn-instance vpn-instance-name ] [ network-address
prefix-length ]
Views
User view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, this command clears BGP IPv6 unicast route
dampening information for the public network, and releases the suppressed BGP IPv6 unicast routes.
network-address prefix-length: Specifies a destination network address and prefix length. The value
range for the prefix-length argument is 0 to 128. If this argument is not specified, the command clears all
BGP IPv6 unicast route dampening information, and releases all suppressed BGP IPv6 unicast routes.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Clear damping information of BGP IPv6 unicast route 2345::/16 for the public network, and release
the suppressed route.
<Sysname> reset bgp dampening ipv6 2345:: 16
Related commands
• dampening
• display bgp routing-table dampened ipv6 unicast
reset bgp flap-info ipv4 unicast
Use reset bgp flap-info ipv4 unicast to clear the flap statistics of BGP IPv4 unicast routes.
Syntax
reset bgp flap-info ipv4 [ unicast ] [ vpn-instance vpn-instance-name ] [ network-address [ mask |
mask-length ] | as-path-acl as-path-acl-number | peer peer-address ]
Views
User view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General
