230
[Sysname-isis-1] import-route limit 1000
Related commands
import-route
isis
Use isis to enable an IS-IS process and enter IS-IS view.
Use undo isis to disable an IS-IS process.
Syntax
isis [ process-id ] [ vpn-instance vpn-instance-name ]
undo isis [ process-id ]
Default
The system does not run any IS-IS process.
Views
System view
Predefined user roles
network-admin
Parameters
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. The default is 1.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the IS-IS process runs on the public network.
Examples
# Enable IS-IS process 1 and specify the system ID as 0000.0000.0002 and area ID as 01.0001.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 01.0001.0000.0000.0002.00
Related commands
• isis enable
• network-entity
isis authentication-mode
Use isis authentication-mode to set the IS-IS authentication mode and password for an interface.
Use undo isis authentication-mode to remove the configuration.
Syntax
isis authentication-mode { md5 | simple | gca key-id { hmac-sha-1 | hmac-sha-224 | hmac-sha-256 |
hmac-sha-384 | hmac-sha-512 } } { cipher cipher-string | plain plain-string } [ level-1 | level-2 ] [ ip |
osi ]
undo isis authentication-mode [ level-1 | level-2 ]
To Next Page
Loading...
Need help?
General
