34
display rib nib
Use display rib nib to display next hop information in the RIB.
Syntax
display rib nib [ self-originated ] [ nib-id ] [ verbose ]
display rib nib protocol protocol-name [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
self-originated: Displays information about next hops of self-originated routes in the RIB.
nib-id: Specifies a NIB by its ID in the range of 1 to FFFFFFFF.
verbose: Displays detailed next hop information in the RIB. Without this keyword, the command displays
brief next hop information in the RIB.
protocol protocol-name: Specifies a protocol by its name, which can be bgp, direct, isis, ospf, rip, or
static.
Examples
# Display brief next hop information in the RIB.
<Sysname> display rib nib
Total number of nexthop(s): 176
NibID: 0x10000000 Sequence: 0
Type: 0x1 Flushed: Yes
UserKey0: 0x0 VrfNthp: 1
UserKey1: 0x0 Nexthop: 0.0.0.0
IFIndex: 0x111 LocalAddr: 0.0.0.0
NibID: 0x10000001 Sequence: 1
Type: 0x1 Flushed: Yes
UserKey0: 0x0 VrfNthp: 1
UserKey1: 0x0 Nexthop: 127.0.0.1
IFIndex: 0x112 LocalAddr: 127.0.0.1
NibID: 0x10000002 Sequence: 2
Type: 0x5 Flushed: Yes
UserKey0: 0x0 VrfNthp: 1
UserKey1: 0x0 Nexthop: 127.0.0.1
IFIndex: 0x112 LocalAddr: 127.0.0.1
NibID: 0x26000000 Sequence: 42
Type: 0x2000 Flushed: Yes
To Next Page
Loading...
Need help?
General
