HP 5920 Series User Manual

194
Field Descri
p
tion
IP address Primary IP address.
Secondary IP address(es) Secondary IP addresses.
IPv6 link-local address IPv6 link local address.
CSNP timer value Interval for sending CSNP packets.
Hello timer value Interval for sending Hello packets.
Hello multiplier value Number of invalid Hello packets.
Lsp timer value Minimum interval for sending LSP packets.
LSP max transmition count Number of LSP packets sent each time.
Cost Cost of the interface.
Priority DIS priority.
IPv4 BFD
Whether BFD for IS-IS is enabled:
• Disabled.
• Enabled.
IPv6 BFD
Whether BFD for IPv6 IS-IS is enabled:
• Disabled.
• Enabled.
# Display IS-IS interface statistics.
<Sysname> display isis interface statistics
Interface Statistics information for ISIS(1)
--------------------------------------------
Type IPv4 Up/Down IPv6 Up/Down
LAN 1/0 0/0
P2P 0/0 0/0
Table 55 Command output
Field Descri
p
tion
Type
Network type of the interface:
• LAN for broadcast network.
• P2P for point-to-point network.
IPv4 UP Number of IS-IS interfaces in up state.
IPv4 Down Number of IS-IS interfaces in down state.
IPv6 UP
Number of IS-ISv6 interfaces in up state. If IPv6 is not
enabled, this field displays 0.
IPv6 Down
Number of IS-ISv6 interfaces in down state. If IPv6 is not
enabled, this field displays 0.
display isis lsdb
Use display isis lsdb to display IS-IS LSDB information.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English