HP 5920 Series User Manual

300
Field Descri
p
tion
Origin
Origin of the route:
• i – IGP—Originated in the AS. The origin of summary routes and
routes advertised with the network command is IGP.
• e – EGP—Learned through EGP.
• ?– incomplete—Unknown origin. The origin of routes redistributed
from IGP protocols is INCOMPLETE.
Network Destination network address.
PrefixLen Prefix length of the destination network address.
From Source IP address of the route.
Flaps Number of routing flaps.
Duration Duration time of the flap route.
Reuse Reuse time of the route.
Path/Ogn
AS_PATH and ORIGIN attributes of the route:
• AS_PATH attribute—Records the ASs the route has passed to avoid
routing loops.
• ORIGIN attribute—Identifies the origin of the route.
Related commands
• dampening
• reset bgp flap-info ipv6 unicast
display bgp routing-table ipv4 unicast
Use display bgp routing-table ipv4 unicast to display BGP IPv4 unicast routing information.
Syntax
display bgp routing-table ipv4 [ unicast ] [ vpn-instance vpn-instance-name ] [ network-address [ { mask
| mask-length } [ longest-match ] ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, the command displays the BGP IPv4 unicast routing
information for the public network.
network-address: Specifies a destination network address.
mask: Specifies a network mask, in dotted decimal notation.
mask-length: Specifies a mask length in the range of 0 to 32.
longest-match: Displays the routing entries selected through the following steps:

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English