HP 5920 Series User Manual

26
Interface : NULL0 Cost : 0
# Display brief information about the routes to destination addresses in the range of 100:: to 300::.
<Sysname> display ipv6 routing-table 100:: to 300::
Summary Count : 3
Destination: 100::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
Destination: 200::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
Destination: 300::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
For command output, see Table 6.
display ipv6 routing-table prefix-list
Use display ipv6 routing-table prefix-list to display information about IPv6 routes permitted by an IPv6
prefix list.
Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] prefix-list prefix-list-name [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command displays routing information for the public
network.
prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63 characters.
verbose: Displays detailed information about all IPv6 routes permitted by the IPv6 prefix list. Without this
keyword, the command displays brief information about active IPv6 routes permitted by the IPv6 prefix
list.
Usage guidelines
If the specified IPv6 prefix list does not exist, the command displays information about all routes.
Examples
# Create an IPv6 prefix list named test to permit the prefix ::1/128.
<Sysname> system-view

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English