HP 5920 Series User Manual

55
[Sysname] rip 100
[Sysname-rip-100] default-route only cost 2
Related commands
rip default-route
display rip
Use display rip to display state and configuration information for a RIP process.
Syntax
display rip [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535. If no process is specified, the
command displays state and configuration information for all RIP processes.
Examples
# Display current state and configuration information for all RIP processes.
<Sysname> display rip
Public VPN-instance name:
RIP process: 1
RIP version: 1
Preference: 100
Routing policy: abc
Fast-reroute:
Routing policy: frr
Checkzero: Enabled
Default cost: 0
Summary: Enabled
Host routes: Enabled
Maximum number of load balanced routes: 8
Update time : 30 secs Timeout time : 180 secs
Suppress time : 120 secs Garbage-collect time : 120 secs
Update output delay: 20(ms) Output count: 3
Silent interfaces: None
Default routes: Originate Default routes cost: 3
Verify-source: Enabled
Networks:
1.0.0.0
Configured peers:
197.168.6.2

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English