14
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
attribute-id: Specifies a route attribute by its ID in the range of 0 to FFFFFFFF.
Examples
# Display route attribute information in the IPv6 RIB.
<Sysname> display ipv6 rib attribute
Total number of attribute(s): 1
Detailed information of attribute 0x9:
Flag: 0x0
Protocol: BGP4+
Address family: IPv6
Reference count: 0
Local preference: 0
Ext-communities number: 0
Ext-communities value: N/A
Communities number: 0
Communities value: N/A
AS-path number: 0
AS-path value: N/A
For command output, see Table 10.
display ipv6 rib graceful-restart
Use display ipv6 rib graceful-restart to display IPv6 RIB GR state information.
Syntax
display ipv6 rib graceful-restart
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display IPv6 RIB GR state information.
<Sysname> display ipv6 rib graceful-restart
RIB GR state : Phase2-calculation end
RCOM GR State : Flush end
Protocol GR state:
To Next Page
Loading...
Need help?
General
