285
Field Description
Maximum number of prefixes
allowed
Maximum number of routes allowed to learn from the peer.
This field does not apply to BGP L2VPN.
Threshold
Percentage of received routes from the peer to maximum routes allowed
to learn from the peer. If the percentage is reached, the system
generates a log message.
This field does not apply to BGP L2VPN.
Configured hold time Configured Hold Interval in seconds.
Keepalive time Keepalive interval in seconds.
Minimum time between
advertisements
Minimum route advertisement interval in seconds.
Peer preferred value
Preferred value specified for routes from the peer.
This field does not apply to BGP L2VPN.
Routing policy configured
Routing policy configured for the peer group.
If no routing policy is specified, this field displays No routing policy is
configured.
This field does not apply to BGP L2VPN.
Members Information about peers included in the peer group.
Peer IP or IPv6 address of the peer.
AS AS number of the peer.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages to be sent.
PrefRcv
For the IPv4, IPv6, VPNv4, and VPNv6 address families, this field
displays the number of prefixes received from the peer.
For MPLS L2VPN, this field displays the number of label blocks received
from the peer.
For VPLS, this field displays the total number of label blocks and VPLS
PEs discovered by BGP.
Up/Down Lasting time of the current BGP session state.
State Current state of the BGP session between the local router and the peer.
IPsec profile name IPsec profile applied to the IPv6 BGP peer group.
display bgp network
Use display bgp network to display information about routes advertised by the network command and
shortcut routes configured by the network short-cut command.
Syntax
display bgp network { ipv4 | ipv6 } [ unicast ] [ vpn-instance vpn-instance-name ]
To Next Page
Loading...
Need help?
General
