19
Field Descri
tion
Version Version of the next hop.
display ipv6 routing-table
Use display ipv6 routing-table to display IPv6 routing table information.
Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command displays routing information for the public
network.
verbose: Displays detailed routing table information, including information about both active and
inactive routes. Without this keyword, the command displays only brief information about active routes.
Examples
# Display brief information about active routes in the IPv6 routing table.
<Sysname> display ipv6 routing-table
Destinations : 3 Routes : 3
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: FE80::/10 Protocol : Direct
NextHop : :: Preference: 0
Interface : NULL0 Cost : 0
Destination: FF00::/8 Protocol : Direct
NextHop : :: Preference: 0
Interface : NULL0 Cost : 0
Table 6 Command output
Field Descri
tion
Destinations Number of destination addresses.
Routes Number of routes.
Destination IPv6 address and prefix of the destination network or host.
To Next Page
Loading...
Need help?
General
