HP 5920 Series User Manual

399
Syntax
summary automatic
undo summary automatic
Default
Automatic route summarization is not performed for redistributed IGP subnet routes.
Views
BGP IPv4 unicast address family view, BGP-VPN IPv4 unicast address family view
Predefined user roles
network-admin
Usage guidelines
After the summary automatic command is configured, BGP summarizes IGP subnets redistributed by the
import-route command.
Automatic summary routes can be manually summarized, but cannot be added to the IP routing table.
Examples
# In BGP IPv4 unicast address family view, configure automatic route summarization for redistributed IGP
subnet routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family ipv4 unicast
[Sysname-bgp-ipv4] summary automatic
# In BGP-VPN IPv4 unicast address family view, configure automatic route summarization for
redistributed IGP subnet routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] address-family ipv4 unicast
[Sysname-bgp-ipv4-vpn1] summary automatic
Related commands
• aggregate
• import-route
timer
Use timer to configure a BGP keepalive interval and holdtime.
Use undo timer to restore the default.
Syntax
timer keepalive keepalive hold holdtime
undo timer
Default
The BGP keepalive interval and the holdtime are 60 seconds and 180 seconds.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English