HP 5920 Series

44
Static routing commands
delete static-routes all
Use delete static-routes all to delete all static routes.
Syntax
delete [ vpn-instance vpn-instance-name ] static-routes all
Views
System view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command deletes all static routes for the public network.
Usage guidelines
When you use this command, the system will prompt you to confirm the operation before deleting all the
static routes.
To delete one static route, use the undo ip route-static command. To delete all static routes, including the
default route, use the delete static-routes all command.
Examples
# Delete all static routes.
<Sysname> system-view
[Sysname] delete static-routes all
This will erase all IPv4 static routes and their configurations, you must reconfigure all
static routes.
Are you sure?[Y/N]:y
Related commands
ip route-static
display route-static nib
Use display route-static nib to display static route next hop information.
Syntax
display route-static nib [ nib-id ] [ verbose ]
Views
Any view
Predefined user roles
network-admin