86
Examples
# Configure the update, timeout, suppress, and garbage-collect timers as 5, 15, 15, and 30 seconds.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] timers update 5 timeout 15 suppress 15 garbage-collect 30
validate-source-address
Use validate-source-address to enable source IP address check on inbound RIP routing updates.
Use undo validate-source-address to disable source IP address check.
Syntax
validate-source-address
undo validate-source-address
Default
Source IP address check on inbound RIP routing updates is enabled.
Views
RIP view
Predefined user roles
network-admin
Examples
# Disable source IP address check on inbound RIP routing updates.
<Sysname> system-view
[Sysname-rip] rip 100
[Sysname-rip-100] undo validate-source-address
version
Use version to specify a global RIP version.
Use undo version to restore the default.
Syntax
version { 1 | 2 }
undo version
Default
No global RIP version is configured. An RIP interface can send RIPv1 broadcasts and receive RIPv1
broadcasts and unicasts, and RIPv2 broadcasts, multicasts, and unicasts.
Views
RIP view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General
