561
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
node-number: Specifies the routing policy node number in the range of 0 to 65535.
Usage guidelines
The specified next node must have a larger number than the current node.
Example
# Specify the next node 20 for node 10 of routing policy policy1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] continue 20
display ip as-path
Use display ip as-path to display BGP AS path list information.
Syntax
display ip as-path [ as-path-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
as-path-number: Specifies an AS path list by its number in the range of 1 to 256. Without this argument,
the command displays information about all BGP AS path lists.
Examples
# Display information about BGP AS path list 1.
<Sysname> display ip as-path 1
ListID Mode Expression
1 permit 2
Table 139 Command output
Field Descri
tion
ListID AS path list ID.
Mode
Match mode:
• permit.
• deny.
Expression Regular expression used to match routes.
To Next Page
Loading...
Need help?
General
