HP 5920 Series User Manual

40
ecmp mode enhanced
Use ecmp mode enhanced to enable the enhanced ECMP mode.
Use undo ecmp mode to restore the default.
Syntax
ecmp mode enhanced
undo ecmp mode
Default
The enhanced ECMP mode is disabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable the enhanced ECMP mode.
<Sysname> system-view
[Sysname] ecmp mode enhanced
The configuration will take effect at the next reboot. Continue? [Y/N]:y
Reboot device to make the configuration take effect.
fib lifetime
Use fib lifetime to set the maximum lifetime for IPv4 or IPv6 routes in the FIB.
Use undo fib lifetime to restore the default.
Syntax
fib lifetime seconds
undo fib lifetime
Default
The maximum lifetime for IPv4 or IPv6 routes in the FIB is 600 seconds.
Views
RIB IPv4 address family view, RIB IPv6 address family view
Predefined user roles
network-admin
Parameters
second: Sets the maximum lifetime for routes in the FIB, in the range of 0 to 900 seconds. When this
argument is set to 0, FIB entries immediately age out after a protocol or RIB process switchover.
Usage guidelines
When a protocol or RIB process switchover occurs and GR or NSR is not configured, FIB entries age out
after the time specified in this command.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English