HP 5920 Series User Manual

474
area area-id: Specifies an area by its ID, an IPv4 address or a decimal integer in the range of 0 to
4294967295 that is translated into an IPv4 address by the system.
interface-type interface-number: Specifies an interface by its type and number.
neighbor-id: Specifies a neighbor's router ID.
Usage guidelines
If no OSPFv3 process is specified, this command displays retransmission list information for all OSPFv3
processes.
If no OSPFv3 area is specified, this command displays retransmission list information for all OSPFv3
areas.
If no interface is specified, this command displays retransmission list information for all interfaces.
If no neighbor is specified, this command displays retransmission list information for all neighbors.
Examples
# Display OSPFv3 retransmission list information.
<Sysname> display ospfv3 retrans-queue
OSPFv3 Process 1 with Router ID 1.1.1.1
Area: 0.0.0.0
Interface Vlan-interface1
-------------------------------------------------------------------------
Nbr-ID 1.2.2.2 Retransmit List
Type LinkState ID AdvRouter SeqNum Age CkSum
0x2009 0.0.0.0 1.3.3.3 0x80000001 3600 0x49fb
Table 124 Command output
Field Descri
p
tion
Area Area ID.
Interface Interface type and sequence number.
Nbr-ID Neighbor ID.
Retransmit List Retransmission list information.
Type LSA type.
AdvRouter Advertising router.
SeqNum LSA sequence number.
Age LSA age.
CkSum Checksum.
display ospfv3 routing
Use display ospfv3 routing to display OSPFv3 route information.
Syntax
display ospfv3 [ process-id ] routing [ ipv6-address prefix-length ]

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English