540
Syntax
isis ipv6 bfd enable
undo isis ipv6 bfd enable
Default
BFD for IPv6 IS-IS is disabled.
Views
Interface view
Predefined user roles
network-admin
Examples
# Enable BFD for IPv6 IS-IS on VLAN-interface 11.
<Sysname> system-view
[Sysname] interface vlan-interface 11
[Sysname-Vlan-interface11] isis ipv6 bfd enable
isis ipv6 enable
Use isis ipv6 enable to enable IPv6 for an IS-IS process on an interface.
Use undo isis ipv6 enable to disable the configuration.
Syntax
isis ipv6 enable [ process-id ]
undo isis ipv6 enable
Default
IPv6 is disabled for an IS-IS process.
Views
Interface view
Predefined user roles
network-admin
Parameters
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. The default is 1.
Examples
# Enable global IPv6, create IS-IS routing process 1, enable IPv6 for the process, and enable IPv6 for the
process on VLAN-interface 100.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] ipv6 enable
[Sysname-isis-1] quit
[Sysname] interface vlan-interface 100
[Sysname--Vlan-interface100] ipv6 address 2002::1/64
To Next Page
Loading...
Need help?
General
