317
Field Description
OutLabel
Outgoing label of the IPv6 unicast route, which is assigned by the peer 6PE
device.
display bgp routing-table ipv6 unicast peer
Use display bgp routing-table ipv6 unicast peer to display BGP IPv6 unicast routing information
advertised to or received from the specified BGP peer.
Syntax
display bgp routing-table ipv6 [ unicast ] peer { ip-address | ipv6-address } { advertised-routes |
received-routes } [ network-address prefix-length | statistics ]
display bgp routing-table ipv6 [ unicast ] vpn-instance vpn-instance-name peer ipv6-address
{ advertised-routes | received-routes } [ network-address prefix-length | statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ip-address: Specifies the IP address of a peer.
ipv6-address: Specifies the IPv6 address of a peer.
advertised-routes: Displays routing information advertised to the specified peer.
received-routes: Displays routing information received from the specified peer.
network-address prefix-length: Specifies the destination network address and prefix length. The value
range for the prefix-length argument is 0 to 128. If this argument is not specified, the command displays
all BGP IPv6 unicast routing information.
statistics: Displays route statistics.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, the command displays the BGP IPv6 unicast routing
information for the public network.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display all BGP IPv6 unicast routing information advertised to BGP peer 1::1.
<Sysname> display bgp routing-table ipv6 peer 1::1 advertised-routes
Total number of routes: 1
BGP local router ID is 192.168.1.136
Status codes: * - valid, > - best, d - dampened, h - history,
To Next Page
Loading...
Need help?
General
