EasyManuals Logo
Home>HP>Switch>5920 Series

HP 5920 Series User Manual

HP 5920 Series
607 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #418 background imageLoading...
Page #418 background image
405
Total matched: 0
Table 94 Command output
Field Description
Policy based routing information for
interface Vlan-interface1(failed)
PBR configuration and statistics on VLAN-interface 1.
failed indicates that the policy (including all its nodes) failed to be
assigned to the driver.
For a global interface (with only a one-dimensional interface number, for
example, VLAN-interface 1), failed can be displayed only when you
specify the slot slot-number option for the command.
node 0 deny(not support)
node 2 permit(no resource)
Match mode of the node, permit or deny.
not support means the device does not support match criteria configured
on the node. no resource means the device has insufficient ACL
resources, and failed to assign ACL resources to the node.
For a global interface (with only a one-dimensional interface number, for
example, VLAN-interface 1), not support and no resource can be
displayed only when you specify the slot slot-number option for the
command.
if-match acl Matches packets against the ACL.
apply next-hop Specify a next hop for permitted packets.
apply output-interface
Vlan-interface2 track 1 (down)
Specify an output interface for permitted packets. The interface status
includes the following:
• up—The interface is up.
• down—The interface is down at network layer.
• inactive—The interface is not in position.
Matched: 0 (no statistics resource)
Number of successful matches on the node (no statistics resource
indicates insufficient statistics resources).
For a global interface (with only a one-dimensional interface number, for
example, VLAN-interface 1), no statistics resource can be displayed only
when you specify the slot slot-number option for the command.
Total matched Total number of successful matches on all nodes.
Related commands
reset ip policy-based-route statistics
display ip policy-based-route local
Use display ip policy-based-route local to display local PBR configuration and statistics.
Syntax
display ip policy-based-route local [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin

Table of Contents

Other manuals for HP 5920 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5920 Series and is the answer not in the manual?

HP 5920 Series Specifications

General IconGeneral
BrandHP
Model5920 Series
CategorySwitch
LanguageEnglish

Related product manuals