HP 5920 Series User Manual

164
Default
Prefix suppression is disabled.
Views
Interface view
Predefined user roles
network-admin
Parameters
disable: Disables prefix suppression on an interface.
Usage guidelines
To disable prefix suppression on an interface associated with an OSPF process that has been enabled
with prefix suppression, execute the ospf prefix-suppression disable command on that interface.
For more information, see "prefix-suppression."
Examples
# Enable prefix suppression on VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospf prefix-suppression
Related commands
prefix-suppression
ospf timer dead
Use ospf timer dead to set the neighbor dead interval.
Use undo ospf timer dead to restore the default.
Syntax
ospf timer dead seconds
undo ospf timer dead
Default
The dead interval is 40 seconds for broadcast and P2P interfaces. The dead interval is 120 seconds for
P2MP and NBMA interfaces.
Views
Interface view
Predefined user roles
network-admin
Parameters
seconds: Specifies the dead interval in the range of 1 to 2147483647 seconds.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English