425
Field Descri
tion
Total Total number of routes learned from RIPng neighbors.
enable ipsec-profile
Use enable ipsec-profile to apply an IPsec profile to a RIPng process.
Use undo enable ipsec-profile to remove the IPsec profile from the RIPng process.
Syntax
enable ipsec-profile profile-name
undo enable ipsec-profile
Default
No IPsec profile is applied to the RIPng process.
Views
RIPng view
Predefined user roles
network-admin
Parameters
profile-name: Specifies an IPsec profile by its name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
This command must reference an IPsec profile. For more information about IPsec profiles, see Security
Configuration Guide.
Examples
# Apply IPsec profile profile001 to RIPng process 1.
<Sysname> system-view
[Sysname] ripng 1
[Sysname-ripng-1] enable ipsec-profile profile001
filter-policy export
Use filter-policy export to configure RIPng to filter redistributed routes. Only routes not filtered can be
advertised in update messages.
Use undo filter-policy export to remove the configuration.
Syntax
filter-policy { acl6-number | prefix-list prefix-list-name } export [ protocol [ process-id ] ]
undo filter-policy export [ protocol [ process-id ] ]
Default
RIPng does not filter redistributed routes.
To Next Page
Loading...
Need help?
General
