HP 5920 Series User Manual

148
Syntax
ispf enable
undo ispf enable
Default
OSPF ISPF is enabled.
Views
OSPF view
Predefined user roles
network-admin
Usage guidelines
Upon topology changes, ISPF recomputes only the affected part of the SPT, instead of the entire SPT.
Examples
# Enable ISPF for OSPF process 100.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] ispf enable
log-peer-change
Use log-peer-change to enable the logging of OSPF neighbor state changes.
Use undo log-peer-change to disable the logging of OSPF neighbor state changes.
Syntax
log-peer-change
undo log-peer-change
Default
The logging of OSPF neighbor state changes is enabled.
Views
OSPF view
Predefined user roles
network-admin
Usage guidelines
This command enables output of OSPF neighbor state changes to the information center. The information
center processes the logs according to user-defined output rules (whether to output logs and where to
output). For more information about the information center, see Network Management and Monitoring
Configuration Guide.
Examples
# Disable the logging of neighbor state changes for OSPF process 100.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] undo log-peer-change

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English