313
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, the command displays BGP IPv6 unicast routes
permitted by an AS path list for the public network.
as-path-acl-number: Specifies an AS path list by its number in the range of 1 to 256.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display BGP IPv6 unicast routes permitted by AS path list 1.
<Sysname> display bgp routing-table ipv6 as-path-acl 1
Total number of routes: 2
BGP local router ID is 192.168.1.136
Status codes: * - valid, > - best, d - dampened, h - history,
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
* >e Network : 2:: PrefixLen : 64
NextHop : 1::2 LocPrf :
PrefVal : 0 OutLabel : NULL
MED :
Path/Ogn: 100i
* >e Network : 3:: PrefixLen : 64
NextHop : 1::2 LocPrf :
PrefVal : 0 OutLabel : NULL
MED :
Path/Ogn: 100i
For command output, see Table 86.
Related commands
ip as-path
display bgp routing-table ipv6 unicast community-list
Use display bgp routing-table ipv6 unicast community-list to display BGP IPv6 unicast routing
information matching a specified BGP community list.
Syntax
display bgp routing-table ipv6 [ unicast ] [ vpn-instance vpn-instance-name ] community-list
{ { basic-community-list-number | comm-list-name } [ whole-match ] | adv-community-list-number }
Views
Any view
To Next Page
Loading...
Need help?
General
