452
Examples
# Display information about all the routes to the OSPFv3 ABR and ASBR.
<Sysname> display ospfv3 abr-asbr
OSPFv3 Process 1 with Router ID 1.1.1.1
Destination :1.1.1.2 Rtr Type : ABR
Area :0.0.0.0 Path Type: Intra
NextHop :FE80:1:1::1 Cost : 1
Destination :1.1.1.3 Rtr Type : ASBR
Area :0.0.0.0 Path Type: Intra
NextHop :FE80:2:1::1 Cost : 1
Table 106 Command output
Field Descri
tion
OSPFv3 Process 1 with Router ID 1.1.1.1 OSPFv3 process is 1, and router ID is 1.1.1.1.
Destination Router ID of an ABR or ASBR.
Rtr Type Router type: ABR, or ASBR.
Area Area ID of the next hop.
Path Type
Type of the route to the ABR or ASBR:
• Intra—Intra-area route.
• Inter—Inter-area route.
NextHop Next hop address.
Cost Cost from the router to the ABR or ASBR.
display ospfv3 abr-summary
Use display ospfv3 abr-summary to display information about summary routes on the OSPFv3 ABR.
Syntax
display ospfv3 [ process-id ] [ area area-id ] abr-summary [ ipv6-address prefix-length ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not specify this
argument, the command displays information about ABR summary routes for all OSPFv3 processes.
area area-id: Specifies an OSPFv3 area by its ID, which is an IP address or a decimal integer in the
range of 0 to 4294967295 that is translated into the IP address format. If you do not specify this option,
the command displays information about ABR summary routes for all OSPFv3 areas.
To Next Page
Loading...
Need help?
General
