To Next Page

To Previous Page

129

display ospf spf-tree

Use display ospf spf-tree to display OSPF topology information.

Syntax

display ospf [ process-id ] [ area area-id ] spf-tree [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the

command displays topology information for all OSPF processes.

area area-id: Specifies an OSPF area by its ID. The area ID is an IP address or a decimal integer in the

range of 0 to 4294967295 that is translated into the IP address format. Without this option, the

command displays topology information for all OSPF areas.

verbose: Displays detailed OSPF topology information. Without this keyword, the command displays

brief OSPF topology information.

Examples

# Display brief topology information for area 0 in OSPF process 1.

<Sysname> display ospf 1 area 0 spf-tree

OSPF Process 1 with Router ID 100.0.0.4

Flags: S-Node is on SPF tree R-Node is directly reachable

I-Node or Link is init D-Node or Link is to be deleted

P-Neighbor is parent A-Node is in candidate list

C-Neighbor is child G-Link is in change list

H-Nexthop changed N-Link is a new path

V-Link is involved

Area: 0.0.0.0 Shortest Path Tree

SpfNode Type Flag SpfLink Type Cost Flag

>192.168.119.130 Network S R

-->114.114.114.111 NET2RT 0 C

-->100.0.0.4 NET2RT 0 P

>114.114.114.111 Router S

-->192.168.119.130 RT2NET 65535 P

>100.0.0.4 Router S

-->192.168.119.130 RT2NET 10 C

HP 5920 Series User Manual

Other manuals for HP 5920 Series