156
Syntax
ospf [ process-id | router-id router-id | vpn-instance vpn-instance-name ] *
undo ospf [ process-id ]
Default
OSPF is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
router-id router-id: Specifies an OSPF router ID in dotted decimal notation.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the OSPF process runs on the public network.
Usage guidelines
You can enable multiple OSPF processes on a router and specify different router IDs for them.
Enable an OSPF process before performing other tasks.
Examples
# Enable OSPF process 100 and specify router ID 10.10.10.1.
<Sysname> system-view
[Sysname] ospf 100 router-id 10.10.10.1
[Sysname-ospf-100]
ospf area
Use ospf area to enable OSPF on an interface.
Use undo ospf area to remove the configuration.
Syntax
ospf process-id area area-id [ exclude-subip ]
undo ospf process-id area [ exclude-subip ]
Default
OSPF is not enabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
To Next Page
Loading...
Need help?
General
