136
Transit Area: 0.0.0.1
Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1
MD5 authentication enabled.
The last key is 3.
The rollover is in progress, 2 neighbor(s) left.
Table 49 Command output
Field Descri
tion
Virtual-link Neighbor-ID ID of the neighbor on the virtual link.
Neighbor-State Neighbor state: Down, Init, 2-Way, ExStart, Exchange, Loading, Full.
Interface IP address and name of the local interface on the virtual link.
Cost Interface route cost.
State Interface state.
Type Virtual link.
Transit Area Transit area ID.
Timers Values of timers: hello, dead, retransmit, and interface transmission delay.
MD5 authentication enabled Authentication mode.
The last key Most recent MD5 authentication key ID.
neighbor(s) Number of neighbors that have not completed key rollover.
display router id
Use display router id to display the global router ID.
Syntax
display router id
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the global router ID.
<Sysname> display router id
Configured router ID is 1.1.1.1
dscp
Use dscp to configure a DSCP value for outgoing OSPF packets.
Use undo dscp to restore the default.
To Next Page
Loading...
Need help?
General
