253
Examples
# Clear IS-IS NSR log information on IRF member device 1.
<Sysname> reset isis non-stop-routing event-log slot 1
reset isis peer
Use reset isis peer to clear data structure information for a specified IS-IS neighbor.
Syntax
reset isis peer system-id [ process-id ]
Views
User view
Predefined user roles
network-admin
Parameters
system-id: Specifies an IS-IS neighbor by its system ID.
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535 to clear data structure
information for the neighbor in the specified IS-IS process.
Usage guidelines
Use this command when you re-establish an IS-IS neighbor relationship.
Examples
# Clear the data structure information of the neighbor with the system ID 0000.0c11.1111.
<Sysname> reset isis peer 0000.0c11.1111
reset osi statistics
Use reset osi statistics to clear OSI packet statistics.
Syntax
reset osi statistics
Views
User view
Predefined user roles
network-admin
Usage guidelines
To obtain OSI packet statistics from the specified time point, first clear the existing statistics.
Examples
# Clear OSI packet statistics.
<Sysname> reset osi statistics
Related commands
display osi statistics
To Next Page
Loading...
Need help?
General
