HP 5920 Series User Manual

423
Field Descri
p
tion
Poison-reverse
Indicates whether the poison reverse function is enabled:
• On—Enabled.
• Off—Disabled.
MetricIn/MetricOut Additional metric to incoming and outgoing routes.
Default route
• Only—The interface advertises only a default route.
• Originate—The interface advertises a default route and
other RIPng routes.
• Off—In this state, the interface does not advertise a default
route.
• In garbage-collection status—In this state, the interface
advertises a default route with a metric of 16.
Default route cost Cost of the default route.
display ripng route
Use display ripng route to display all RIPng routes for a RIPng process.
Syntax
display ripng process-id route [ ipv6-address prefix-length [ verbose ] | peer ipv6-address | statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies a RIPng process by its ID in the range of 1 to 65535.
ipv6-address prefix-length: Specifies an IPv6 address. The ipv6-address argument specifies an IPv6
address. The prefix-length argument specifies a prefix length in the range of 0 to 128.
verbose: Displays all routing information for the specified destination IPv6 address. Without this keyword,
the command displays only optimal RIPng routes with the specified destination IPv6 address.
peer ipv6-address: Specifies a neighbor by its IPv6 address.
statistics: Displays routing information statistics, including total number of routes and the number of
routes learned from each neighbor.
Examples
# Display routing information for RIPng process 1.
<Sysname> display ripng 1 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
O - Optimal, F - Flush to RIB
----------------------------------------------------------------
Peer FE80::20C:29FF:FE7A:E3E4 on Vlan-interface2

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English