473
Examples
# Display OSPFv3 request list information.
<Sysname> display ospfv3 request-queue
OSPFv3 Process 1 with Router ID 1.1.1.1
Area: 0.0.0.0
Interface Vlan-interface1
-------------------------------------------------------------------------
Nbr-ID 1.3.3.3 Request List
Type LinkState ID AdvRouter SeqNum Age CkSum
0x4005 0.0.34.127 1.3.3.3 0x80000001 0027 0x274d
0x4005 0.0.34.128 1.3.3.3 0x80000001 0027 0x2d45
0x4005 0.0.34.129 1.3.3.3 0x80000001 0027 0x333d
0x4005 0.0.34.130 1.3.3.3 0x80000001 0027 0x3935
Table 123 Command output
Field Descri
tion
Area Area ID.
Interface Interface type and sequence number.
Nbr-ID Neighbor ID.
Request list Request list information.
Type LSA type.
AdvRouter Advertising router.
SeqNum LSA sequence number.
Age LSA age.
CkSum Checksum.
display ospfv3 retrans-queue
Use display ospfv3 retrans-queue to display retransmission list information.
Syntax
display ospfv3 [ process-id ] [ area area-id ] retrans-queue [ interface-type interface-number ]
[ neighbor-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
To Next Page
Loading...
Need help?
General
