582
Predefined user roles
network-admin
Parameters
address: Matches the destination address of IPv6 routes.
next-hop: Matches the next hop of IPv6 routes.
route-source: Matches the source address of IPv6 routes.
acl acl6-number: Specifies an IPv6 ACL for filtering by its number in the range of 2000 to 3999 for
address, and 2000 to 2999 for next-hop and route-source.
prefix-list prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63
characters.
Examples
# Configure node 10 of routing policy policy1 to permit routes whose next hop matches IPv6 prefix list
p1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match ipv6 next-hop prefix-list p1
ipv6 prefix-list
Use ipv6 prefix-list to configure an IPv6 prefix list or an item for it.
Use undo ipv6 prefix-list to remove an IPv6 prefix list or an item.
Syntax
ipv6 prefix-list prefix-list-name [ index index-number ] { deny | permit } ipv6-address prefix-length
[ greater-equal min-prefix-length ] [ less-equal max-prefix-length ]
ipv6 prefix-list prefix-list-name [ index index-number ] { deny | permit } ipv6-address inverse prefix-length
undo ipv6 prefix-list prefix-list-name [ index index-number ]
Default
No IPv6 prefix list is configured.
Views
System view
Predefined user roles
network-admin
Parameters
prefix-list-name: Specifies a name for the IPv6 prefix list, a case-sensitive string of 1 to 63 characters.
index-number: Specifies an index number for an IPv6 prefix list item, in the range of 1 to 65535. An item
with a smaller number is matched first.
deny: Specifies the deny mode. If a route matches the item, the route is denied without matching against
the next item; if not, the route matches against the next item (suppose the IPv6 prefix list has multiple
items).
To Next Page
Loading...
Need help?
General
