HP 5920 Series User Manual

510
Examples
# Restart all OSPFv3 processes.
<Sysname> reset ospfv3 process
Reset OSPFv3 process? [Y/N]:y
reset ospfv3 redistribution
Use reset ospfv3 redistribution to restart route redistribution.
NOTE:
This command is available in Release 2311P04 and later versions.
Syntax
reset ospfv3 [ process-id ] redistribution
Views
User view
Predefined user roles
network-admin
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not specify this
argument, the command restarts route redistribution for all OSPFv3 processes.
Examples
# Restart route redistribution.
<Sysname> reset ospfv3 redistribution
reset ospfv3 statistics
Use reset ospfv3 statistics to clear OSPFv3 statistics.
NOTE:
This command is available in Release 2311P04 and later versions.
Syntax
reset ospfv3 [ process-id ] statistics
Views
User view
Predefined user roles
network-admin
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not specify this
argument, the command clears statistics for all OSPFv3 processes.

HP 5920 Series Specifications

General

Model	HP 5920 Series
MAC address table size	32, 000 entries
Input voltage	100-240 VAC
IPv6 Support	Yes
Management	CLI, Web, SNMP
Jumbo frame support	Yes
Operating temperature	0°C to 45°C
Power Supply	Redundant (optional)
VLAN Support	Yes
Layer 3 Routing	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X, RADIUS, TACACS+