HP 5920 Series User Manual

281
# In BGP-VPN IPv6 unicast address family view, enable default route redistribution from OSPFv3 process
1 into the IPv6 BGP routing table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] address-family ipv6 unicast
[Sysname-bgp-ipv6-vpn1] default-route imported
[Sysname-bgp-ipv6-vpn1] import-route ospfv3 1
Related commands
import-route
display bgp dampening parameter ipv4 unicast
Use display bgp dampening parameter ipv4 unicast to display BGP IPv4 unicast route dampening
parameters.
Syntax
display bgp dampening parameter ipv4 [ unicast ] [ vpn-instance vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, the command displays BGP IPv4 unicast route
dampening parameters for the public network.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display BGP IPv4 unicast route dampening parameters for the public network.
<Sysname> display bgp dampening parameter ipv4
Maximum suppression time (in seconds) : 3973
Ceiling value : 16000
Reuse value : 750
Half-life time for reachable routes (in seconds) : 900
Half-life time for unreachable routes (in seconds) : 900
Suppression threshold : 2000
Table 70 Command output
Field Descri
p
tion
Maximum suppression time
Maximum time (in seconds) for the penalty value to
decrease from the ceiling value to the reuse value.
Ceiling value Penalty ceiling value.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English