Function/
Specificatio
n
H801SPUA H801SPUC H801SPUF
Limitation None None Does not support the MSAN VoIP
service.
When the system works in enhanced
Layer 3 forwarding mode:
l The H801SPUF and H801SPUB
boards cannot be configured
concurrently.
l Does not support BFD
configurations. The BFD
configurations will be lost after the
basic Layer 3 forwarding mode is
switched to the enhanced Layer 3
forwarding mode.
l Cannot be deleted if it is specified as
a Layer 3 forwarding board.
l If the H801SPUF board working as a
Layer 3 forwarding board is
modified using CLI, the original and
new H801SPUF boards need to be
reset.
l If the specified H801SPUF board is
bound to another H801SPUF board,
these two boards are used as Layer 3
forwarding boards. Each subrack
supports a maximum of 2
H801SPUF boards working in Layer
3 forwarding mode and these two
boards must be installed in the
specified slots. Otherwise, the
second SPUF board cannot be
switched to the Layer 3 forwarding
mode.
3.12.2 H801SPUA Board Description
The H801SPUA board is a service processing board, it supports upstream transmission and
cascading.
Functional Specifications
Please refer to "SPU Service Process Boards Comparison".
Technical Specifications
Please refer to "Power Consumption and Maximum Frame Size of Boards".
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
3 Board
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
328
To Next Page
Loading...
Need help?
General
