PROTECTION OF THE VEHICLE
Always be sure to cover fenders, seats, and floor areas before starting work.
Be sure that all necessary tools and measuring equipment are available before starting work.
Use special tools when they are required.
Automatic transaxle 7.8 (8.2, 6.8)
Power steering 0.9 (0.95, 0.79)
Recommended SAE viscosity grades :
For best performance and maximum protection of all types of operation, select only those lubricants which :
1. Satisfy the requirements of the API classification.
2. Have the proper SAE grade number for expected ambient temperature range.
GENERAL SERVICE INFORMATION
The support rod must be inserted into the hole near the edge of the hood whenever you inspect the engine compartment to
prevent the hood from falling and possibly causing injury.
Make sure that the support rod has been released prior to closing the hood. Always check to be sure the hood is firmly latched
before driving the vehicle.
PREPARATION OF TOOLS AND MEASURING EQUIPMENT
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title
To Next Page
Loading...
Need help?
General
