Hyundai Tiburon 2003 User Manual

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Body (Interior and Exterior) > Exterior > fender > Repair
procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Body (Interior and Exterior) > Exterior > fender >
Repair procedures
REMOVAL AND INSTALLATION
FENDER
1. Remove the front mud guard and wheel guard.
2. Remove the 3 bolts holding the head lamp and disconnect the wire connector.
Remove the head lamp assembly.
3. Remove the front bumper. (refer to front bumper group)
4. Remove the fender mounting bolts and remove the fender panel assembly.
Use care to avoid damaging the paint.
5. Installation is the reverse of the removal.
In order to prevent the fender mounting bolt area from forming rust, apply tape sealer between the fender
and the bodypanel.
FENDER GARNISH
1. Remove the wheel guard.
Page
1
of
2
24.04.2008
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title
...

Hyundai Tiburon 2003 Specifications

General

Brand	Hyundai
Model	Tiburon 2003
Category	Automobile
Language	English