TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Body (Interior and Exterior) > Bumper > rear bumper > Repair
procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Body (Interior and Exterior) > Bumper > rear
bumper > Repair procedures
1. Loosen the luggage side cover mounting screws and remove the luggage side cover.
2. Remove the rear combination lampl.
Disconnect the combination lamp connector.
3. Loosen the rear bumper cover mounting screw from the rear wheel house.
4. Loosen the rear bumper cover mounting screw from the rear wheel house.
5. Loosen the rear bumper upper part mounting screws.