Hyundai Tiburon 2003 User Manual

DISASSEMBLY
1. Remove the center bolt(A) while holding the pressure plate with a commercially available pressure plate bolt
remover(B); Special tool number 09977-2900.
2. Remove the pressure plate(A) and shim(B), taking care not to lose the shims. If the clutch needs adjustment,
increase or decrease the number and thickness of shims as necessary, then reinstall the pressure plate, and
recheck its clearance.
3. If you replacing the field coil, remove snap ring(A) with snap ring pliers.
•
Be careful not to damage the pulley(B) and compressor during remove/installation.
•
Once snap ring(A) is removed, replace it with a new one.
4. Remove the screw from the field coil ground terminal.
Page
3
of
4
24.04.2008
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title
...

Hyundai Tiburon 2003 Specifications

General

Brand	Hyundai
Model	Tiburon 2003
Category	Automobile
Language	English