Hyundai Tiburon 2003 User Manual

6. Start the engine and run it at idle for 1-2 minutes.
7. Move the select lever through all positions, and then move it to the N position.
8. Drive the vehicle until the fluid temperature rises to the normal temperature (70~80°C), and then ch eck the fluid level
again. The fluid level must be at the HOT Mark.
9. Firmly insert the oil level gauge into the oil filler tube.
TRANSAXLE RANGE SWITCH CONTINUITY CHECK
TRANSAXLE RANGE SWITCH AND CONTROL CABLE ADJUSTMENT
1. Set the selector lever to the "N" position.
2. Loosen the control cable to the manual control lever coupling nut to free the cable and lever.
Page
2
of
13
24.04.2008
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title
...

Hyundai Tiburon 2003 Specifications

General

Brand	Hyundai
Model	Tiburon 2003
Category	Automobile
Language	English