1. Twisting the hose by hand, check for cracks.
2. Check that the hose does not contact with other components
HOW TO FILL WITH POWER STEERING FLUID
1. Fill the power steering reservoir with the power steering fluid to the "Max." position.
2. Lift the front wheels with a jack and turn the steering wheel fully to the left and right, 5~6 times for 15~20 sec.,
while driving the pulleyonly by operating the start motor.
3. Start the engine, let it idle and turn the steering wheel fully left and right several times until bubbles disappear
from the power steering reservoir.
4. If the oil color does not become milk-white and the oil level is constant at the "MAX" position, fluid level is O.K.
If the oil level changes when turning the steering wheel, and the oil overflows when stopping the engine, it
shows that air bleeding wasn't performed perfectly. As it can cause noise and early damage, you must
repeat the aboveprocedures.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title
To Next Page
Loading...
Need help?
General
