Hyundai Tiburon 2003 User Manual

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Driveshaft and axle > General Information > Special Service
Tools, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Driveshaft and axle > General Information > Special
Service Tools
SPECIAL TOOLS
Tool (Number and Name) Illustration Use
09216-21100
Mounting bushing remover and
installer
Removal of the center bearing (Use with
09495-33100)
09495-33000
Puller
Removal of wheel bearing inner race from
the hub.
09495-33100
Center bearing remover and
installer
1. Removal of wheel bearing from the
knuckle. (Use with 09517-29000)
2. Installation of hub to the knuckle.
3.
Removal of the center bearing (Use with
09216-21100)
09517-21500
Front hub remover and installer
1. Removal of front hub from the knuckle.
(Use with 09517-29000)
2. Measurement of front wheel bearing
pre-load. (Use with 09532-11600)
09517-29000
Knuckle arm bridge
1. Removal of wheel bearing outer race
from the knuckle. (Use with 09495-
33100)
09517-43001
Bearing puller
Removal of the center bearing bracket
09532-11600
Preload socket
Measurement of front wheel bearing pre-
load. (Use with 09517-21500)
09532-11500
Pinion bearing outer race
Installation of wheel bearing to the knuckle.
09568-34000
Ball joint puller
Separation of front lower arm and tie rod
end ball joint.
Page
1
of
2
24.04.2008
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title
...

Hyundai Tiburon 2003 Specifications

General

Brand	Hyundai
Model	Tiburon 2003
Category	Automobile
Language	English