Hyundai Tiburon 2003 User Manual

BLEEDING
Use the specified fluid. Avoid mixing different brands of fluid.
SAE J1703 (DOT 3 or DOT 4)
1. Loosen the bleeder screw at the clutch release cylinder.
2. Push the clutch pedal down slowly until all is expelled.
3. Hold the clutch pedal down until the bleeder is retightened.
4. Refill the clutch master cylinder with the specified fluid.
The rapidly-repeated operation of the clutch pedal in B-C range may cause the release cylinder's position
to be forcedout from the release cylinder body during air bleeding, Repress the clutch pedal after it
returns to the "A" point completely.
Page
2
of
2
24.04.2008
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title
...

Hyundai Tiburon 2003 Specifications

General

Brand	Hyundai
Model	Tiburon 2003
Category	Automobile
Language	English