Siemens SINUMERIK 828D Function Manual

V1: Feedrates
17.7 Data lists
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
1415
17.7 Data lists
17.7.1 Machine data
17.7.1.1 NC-specific machine data
17.7.1.2 Channelspecific machine data
Number Identifier: $MN_ Description
10704 DRYRUN_MASK Activation of dry run feedrate
10710 PROG_SD_RESET_SAVE_TAB Setting data to be updated
11410 SUPPRESS_ALARM_MASK Mask for suppressing special alarms
11550 STOP_MODE_MASK Defines the stop behavior
12000 OVR_AX_IS_GRAY_CODE Axis feedrate override switch, graycoded
12010 OVR_FACTOR_AX_SPEED Evaluation of the axis feed override switch
12020 OVR_FEED_IS_GRAY_CODE Path feed override switch, graycoded
12030 OVR_FACTOR_FEEDRATE Evaluation of the path feed override switch
12040 OVR_RAPID_IS_GRAY_CODE Rapid traverse override switch, graycoded
12050 OVR_FACTOR_RAPID_TRA Evaluation of the rapid traverse override switch
12060 OVR_SPIND_IS_GRAY_CODE Spindle override switch, graycoded
12070 OVR_FACTOR_SPIND_SPEED Evaluation of the spindle override switch
12080 OVR_REFERENCE_IS_PROG_FEED Override reference velocity
12082 OVR_REFERENCE_IS_MIN_FEED Defining the reference of the path override
12090 OVR_FUNCTION_MASK Selection of override specifications
12100 OVR_FACTOR_LIMIT_BIN Limit for binarycoded override switch
12200 RUN_OVERRIDE_0 Traversing with override 0
12202 PERMANENT_FEED Fixed feedrates for linear axes
12204 PERMANENT_ROT_AX_FEED Fixed feedrates for rotary axes
Number Identifier: $MC_ Description
20100 DIAMETER_AX_DEF Geometry axes with transverse axis functions
20150 GCODE_RESET_VALUES Initial setting of the G groups
20172 COMPRESS_VELO_TOL Maximum permissible deviation from path feed for
compression
20200 CHFRND_MAXNUM_DUMMY_BLOCKS Empty blocks with phase/radii
20201 CHFRND_MODE_MASK Behavior for chamfer/rounding
20750 ALLOW_GO_IN_G96 G0 logic for G96, G961
21200 LIFTFAST_DIST Traversing path for fast retraction from the contour
21220 MULTFEED_ASSIGN_FASTIN Assignment of the NCK I/Os for "Multiple feeds in one
block"
21230 MULTFEED_STORE_MASK Storage behavior, save "Multiple feeds in one block"

Siemens SINUMERIK 828D Specifications

General

Brand	Siemens
Model	SINUMERIK 828D
Category	Control Systems
Language	English