Siemens SINUMERIK 828D Function Manual

N2: Emergency stop
11.6 Data lists
Basic Functions
824 Function Manual, 09/2011, 6FC5397-0BP40-2BA0
11.6 Data lists
11.6.1 Machine data
11.6.1.1 Drive-specific machine data
11.6.1.2 Axis/spindlespecific machine data
11.6.2 Signals
11.6.2.1 Signals to NC
11.6.2.2 Signals from NC
11.6.2.3 Signals to BAG
Number Identifier: $MD_ Description
1404 PULSE_SUPPRESSION_DELAY Time for pulse suppression
Number Identifier: $MA_ Description
36610 AX_EMERGENCY_STOP_TIME Length of the braking ramp for error states
36620 SERVO_DISABLE_DELAY_TIME Cutout delay servo enable
Signal name SINUMERIK 840D sl SINUMERIK 828D
Emergency stop DB10.DBX56.1 DB2600.DBX0.1
Acknowledge Emergency Stop DB10.DBX56.2 DB2600.DBX0.2
Signal name SINUMERIK 840D sl SINUMERIK 828D
Emergency stop active DB10.DBX106.1 DB2700.DBX0.1
Signal name SINUMERIK 840D sl SINUMERIK 828D
Mode group RESET DB11.DBX0.7 DB3000.DBX0.7

Siemens SINUMERIK 828D Specifications

General

Brand	Siemens
Model	SINUMERIK 828D
Category	Control Systems
Language	English