To Next Page

To Previous Page

1038 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide

34 :WMEMory<r> Commands

:WMEMory<r>:SAVE

(see page 1138)

Command Syntax

:WMEMory<r>:SAVE <source>

<r> ::= 1-2 in NR1 format

<source> ::= {CHANnel<n> | FUNCtion | MATH}

<n> ::= 1 to (# analog channels) in NR1 format

The :WMEMory<r>:SAVE command copies the analog channel or math

function waveform to the specified reference waveform location.

See Also • Chapter 34, “:WMEMory<r> Commands,” starting on page 1033

• ":WMEMory<r>:DISPlay" on page 1036

NOTE

Only ADD or SUBtract math operations can be saved as reference waveforms.

Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 3000 X-Series