Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

784 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
28 :SEARch Commands
:SEARch:EDGE:SOURce
(see page 1138)
Command Syntax
:SEARch:EDGE:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :SEARch:EDGE:SOURce command selects the channel on which to
search for edges.
Query Syntax
:SEARch:EDGE:SOURce?
The :SEARch:EDGE:SOURce? query returns the current source.
Return Format
<source><NL>
<source> ::= CHAN<n>
See Also • Chapter 28, “:SEARch Commands,” starting on page 777

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English