Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:CHANnel<n> Commands 10
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 265
:CHANnel<n>:COUPling
(see page 1138)
Command Syntax
:CHANnel<n>:COUPling <coupling>
<coupling> ::= {AC | DC}
<n> ::= 1 to (# analog channels) in NR1 format
The :CHANnel<n>:COUPling command selects the input coupling for the
specified channel. The coupling for each analog channel can be set to AC
or DC.
Query Syntax
:CHANnel<n>:COUPling?
The :CHANnel<n>:COUPling? query returns the current coupling for the
specified channel.
Return Format
<coupling value><NL>
<coupling value> ::= {AC | DC}
See Also • "Introduction to :CHANnel<n> Commands" on page 262

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English