Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:SBUS<n> Commands 27
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 691
:SBUS<n>:I2S:BASE
(see page 1138)
Command Syntax
:SBUS<n>:I2S:BASE <base>
<base> ::= {DECimal | HEX}
The :SBUS<n>:I2S:BASE command determines the base to use for the I2S
decode display.
Query Syntax
:SBUS<n>:I2S:BASE?
The :SBUS<n>:I2S:BASE? query returns the current I2S display decode
base.
Return Format
<base><NL>
<base> ::= {DECimal | HEX}
Errors • "- 241, Hardware missing" on page 1099
See Also • "Introduction to :SBUS<n> Commands" on page 629
• ":SBUS<n>:I2S Commands" on page 688

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English